Portfolio

This was a project that consisted of the following works through heavily trafficked streets through Cork City: Excavation of large sections of Roadway through the busy streets of Cork City while maintaining a reasonably steady flow of traffic throughout the works under our Traffic Management Set-up’s. We repaired and replaced old sections of main &

This was a project that consisted of the following works in one of the largest Universities in the Country. The project involved the excavation/removal of existing paving, installation of new drainage and pathways, installation of large Limestone Kerb sets aswell as high spec Granite Paving for our client. Pedestrian Management was another major factor on

This is a largescale housing development project consisting of over 130 separate units ranging from apartments to houses. Conradh carried out the civil engineering elements of the work, which  consisted mainly of the following: Earthworks & Muck Shifting Operations. Structure Footings: Excavate, Install Stone & Steelworks, Pour & Finish Concrete. Pipework: All Storm & Foul

Private Housing full construction Home Extensions full construction Housing Retrofits for County Councils External Finishing Works Paving (Brick & Matt Printing) Kerbing Concrete Footpaths Sewerage & Percolation Landscaping Fencing Etc.

Pipe Surgery on an 550mm DI W.Main under 25bar pressure Installation of 550mm DI Pipe Arrangement incl associated valves & chamber’s. Temporary Works Coordination Installation Removal Key Notes Completed at night during off peak hours adjacent to live dual carriageway. 10mm Tolerance on Pipework cut out which was 5.6m long. All Works Completed in 1Nr

7m Deep Civils Excavation Temporary Works Coordination Installation Removal Auger Boring of 450mm DI Sleeve under Dunkellin River in Craughwell Village 38m long. Installation of 355mm HDPE Pipework through the DI Sleeve, incl all associated Valves & Chambers etc. Flood Alleviation Control, incl liaison with Inland Fisheries to ensure all works were carried out as

1.1km of 125mm HDPE Pipework 3.7km of 250mm HDPE Pipework All Ancillary Valves, Chambers & Fittings 2Nr 8.000cu.m Water Attenuation Ponds Testing & Commissioning of System

This was a project that consisted of the following: Excavation of approx 700m2 of existing ground in order to construct 2Nr in-situ concrete walls, designed in order to retain the adjoining embankments. 3m High wall – 130m long. 5m to 2.5m stepped wall – 65m long. 42t of steel reinforcement tied and fixed into position.

125mm to 600mm dia Pipework (HDPE / DI) In situ Reinforced Concrete Works Reservoir Bases Treatment Buildings Bunded Site Slabs & Plinths In situ Water Attenuation Tanks Retaining Walls Steelwork, Formwork, Falsework Sewer & Storm Drainage & Ducting Kerbing & Footpaths

3.4km of 200mm HDPE Pipework (Open cut) 0.8km of 90mm HDPE Pipework (Open cut) 48Nr Domestic Supply Services All Associated Valves, Chambers & Fittings Traffic Management Road Reinstatement (macadam) Water Main Swabbing & Testing